Did you ever get a reply to this and get it to work? I now have a similar issue with my STB since I upgraded to Digital yesterday. I've previously been able to control the analog (max) STB with an upgrade to my B&O TV called STB-C but it doesn't work for the latest digital box (yet). I found the
source code for the SCV remote through an internet search, as follows:
http://lirc.sourceforge.net/remotes/sta ... Q-1H57-SCV
# this config file was automatically generated
# using remote-0.7.2(act200l) on Thu Oct 20 11:27:18 2005
#
# contributed by Chris Hamilton <chris>
#
# brand: Advanced Digital Broadcast DVB STB OEM for Starhub
# model no. of remote control: Starhub ABQ-1H57-SCV remote
# devices being controlled by this remote: Starhub ABQ-1H57-SCV STB
#
# This is the remote that comes with the standard DVB STB/tuner that
# Starhub rents to subscribers.
begin remote
name starhub
bits 8
flags RCMM
eps 2
aeps 100
header 368 320
three 122 820
two 122 650
one 122 485
zero 122 320
ptrail 122
pre_data_bits 24
pre_data 0x219026
gap 90000
toggle_bit 17
begin codes
power 0x0C
tv 0x43
mute 0x0D
audio 0x4E
1 0x01
2 0x02
3 0x03
4 0x04
5 0x05
6 0x06
7 0x07
8 0x08
9 0x09
0 0x00
star 0xF6
pound 0xF7
red 0x6D
green 0x6E
yellow 0x6F
blue 0x70
info 0x0F
guide 0xCC
up 0x58
left 0x5A
right 0x5B
down 0x59
ok 0x5C
back 0x83
exit 0xE0
channel_up 0x20
channel_down 0x21
volume_up 0x10
volume_down 0x11
menu 0x54
favorite 0x84
ppv-vod 0xFD
help 0x81
mosaic 0x66
messaging 0xF3
games 0xF5
option 0xDB
end codes
end remote